Plain XPS
Uncoated insulation board
Choose thickness to suit the specified floor build-up. This is not a cement-coated tiling surface.
Explore options
Cosyspace · Product guide
Plain XPS insulation boards for suitable insulated laminate and wood floor constructions. Lightweight foam insulation, without a cement coating.
Thermal and compression figures below apply to the 20 mm and 30 mm options only.
| Specification | Value |
|---|---|
| Board size | 1200 × 600 mm |
| Thicknesses covered by these figures | 20 mm and 30 mm |
| Thermal conductivity λD | 0.034 W/(m·K) |
| Compressive strength | 300 kPa |
| Calculated thermal resistance — 20 mm | 0.59 m²·K/W |
| Calculated thermal resistance — 30 mm | 0.88 m²·K/W |
6 and 10 mm options take up less floor height; 20 and 30 mm options need more depth. Choose alongside the supporting deck and final floor finish, allowing for door clearances and transitions.
Yes, as insulation beneath the heating layer in a compatible floor construction. Do not place insulation over existing heated screed if you want its heat to reach the room. The layers above the heating must support the flooring without unnecessarily restricting heat transfer.
Divide your floor area in m² by 0.72 and round up, then add an allowance for cuts and waste. Order within the minimum quantity shown above.
These boards have no cement coating. For a surface intended to receive tile adhesive, see our cement-coated tile backer boards.
10 boards cover 7.2 m²; 20 boards cover 14.4 m² before cuts and waste. Allow extra for your room layout.
Each unit ordered is one board. Select your required board quantity above, following the minimum quantity shown.
Need a smaller board format? Compare our 600 × 600 mm XPS boards, which cover 0.36 m² each.
The Cosyspace board guide
Three different constructions. Check your floor finish and system requirements before choosing.
Uncoated insulation board
Choose thickness to suit the specified floor build-up. This is not a cement-coated tiling surface.
Explore options
Reinforced surface, XPS core
For suitable tiling systems. Fixings, joints and wet-area treatment depend on the complete installation.
Explore options
Channels for heating pipework
Check pipe size, groove layout and floor-finish requirements against your heating-system design.
Explore optionsProduct details
Prices and availability reflect the options currently offered. Select your required option above.
| Option | SKU | Price including VAT | Availability |
|---|---|---|---|
| 6mm | NP-Blue-XPS-6mm | £4.99 | In stock |
| 10mm | NP-Blue-XPS-10mm | £6.46 | In stock |
| 20mm | NP-Blue-XPS-20mm | £9.99 | Sold Out |
| 30mm | NP-Blue-XPS-30mm | £11.99 | In stock |