Heat My Home undertile heating cable 15 W/m

Heat My Home’s electric undertilde heating cables are design for warming floors and heating rooms beneath virtually any floor covering. They are particularly suit to small or complicated areas where the loose heating cable can be simpler to install than a heating mat. If instal at 200W/sqm the system can be used beneath tile and stone floors ensuring a speedy warm up time, and if laid on top of insulation boards it can provide sole source heating even in high heat loss rooms such as conservatories.

Installation of Undertilde Heating Cable

When install at 150W/sqm the cable can be used directly beneath tile and stone floors, or if covered by a 12mm layer of flexible levelling compound beneath virtually any other floor covering. In reasonably well insulated rooms the system can provide sole source heating or floor warming at this output. The cables are compatible with any mains-Voltage underfloor heating controller and this allows the floor and air temperature to be independently control. Heating cables should not be placed beneath any furniture without a 50mm air-gap beneath as the heat needs to be able to escape. The cables can be instal onto the floor using either a undertilde heating cables carrier mat (anti-fracture membrane) or double-sided and masking tapes, all available separately.

Power Output 15 W/m
Voltage 240 V – 50Hz
Cable diameter Ø3.5 mm
Inner conductor, insulation High-temperature TPE
Cold tail 2.5 m
Approval CE
Cable type 2 wires + shield
Screen Aluminium mylar tape and
copper conductor
Outer sheath Polyolefin
Maximum permissible cable temperature 90 °C
Overall height 4mm additional build height
Warranty 15 years
Standard EN60335-2-96
Tolerance resistance -5%/+10%
Tolerance length +/- 2%